THE NEW MODELS

In 2018, the Evnroll putter armada expands by four models, bringing the grand total to twelve putter choices. With all of these putter options, Evnroll is now able to match a model to just about any golfer's stroke and preference. Mallet or blade.


 

ER1.1

ER1.1 TOUR BLADE – OLD BECOMES NEW. THE CLASSIC PLUMBER-NECK FLANGE BLADE, ORIGINALLY INVENTED BY KARSTEN SOLHIEM 50 YEARS AGO, IS A STANDARD MODEL FOR ALL PUTTER COMPANIES. THIS IS OUR VERSION. VIRTUALLY EVERY PLUMBER-NECK ON THE MARKET HAS A 45 GRAM HOSEL ON THE HEEL SIDE OF THE PUTTER HEAD. THIS MOVES THE CENTER OF MASS (AKA SWEET SPOT) TOWARD THE HEEL AWAY FROM THE CENTER SIGHT-LINE.

THE ER1.1 HAS A SLIGHTLY SMALLER AND THINNER HEEL SECTION AND A CHANNEL IN FRONT OF THE HOSEL ARM TO BALANCE THE MASS ON EITHER SIDE OF THE CENTER SIGHT LINE KEEPING THE SWEET SPOT DIRECTLY IN THE CENTER. WE HAVE ALSO ELIMINATED THE TYPICAL ELBOW BELOW THE HOSEL COLLAR WHICH CREATES A DOWN-LEFT VISUAL ANGLE TO A GOLFER. BY CREATING A STRAIGHT CUT AT THE BASE OF THE COLLAR THAT MATCHES THE SQUARE SIDE OF THE HOSEL ARM. THIS FORMS A CLEAN PERPENDICULAR LINE TO THE LEADING EDGE OF THE FACE FOR BETTER ALIGNMENT.
 

ER2CS

ER2CS – THE ORIGINAL ER2 HAS BEEN BY FAR THE MOST POPULAR BLADE PUTTER MODEL AND THE WINNER OF MYGOLFSPY’S “2017 MOST WANTED BLADE”. WE’VE TAKEN THE ER2 AND MOUNTED A STAINLESS STEEL HOSEL PIN VERY SLIGHTLY HEEL-WARD FROM THE CENTER TO GIVE IT A 5% TOE DOWN BALANCE. WHILE ONLY ABOUT 5% OF GOLFERS PREFER CENTER-SHAFTING, THEY ARE AN ADAMANT AND PERSISTENT GROUP (LIKE THE “LEFTIES”).

TO PRODUCE A CENTER-SHAFTED ER2 WE HAD TO THICKEN THE CAVITY WALL BEHIND THE HITTING AREA TO ALLOW FOR SUFFICIENT WIDTH TO RECEIVE A REVERSE THREAD HOSEL PIN. THIS ADDED 40 GRAMS TO THE HEAD WEIGHT. THIS EXTRA STEEL NEEDED TO BE REMOVED IN SUCH A WAY TO MAINTAIN THE SAME CENTER OF MASS AND TARGETED SWING WEIGHT. BY DRILLING FOUR 10 GRAM HOLES RIGHT BEHIND THE FACE IN THE HEEL AND TOE, WE WERE ABLE TO STRATEGICALLY REMOVE THE 40 GRAMS, GIVING THE ER2CS SAME FEEL AND STABILITY OF THE ORIGINAL ER2 MIDBLADE.
 

ER3

ER3 WINGBLADE – SOMETIMES YOU JUST HAVE TO HANG IT OUT THERE AND MIX IT UP. THE ORIGINAL ER3 WINGBLADE WAS AN UNTRADITIONAL DESIGN WHERE FORM FOLLOWED FUNCTION. THE OUTWARD HEEL AND TOE FLARE CREATED INCREASED STABILITY AND A DIFFERENT NON-CLASSIC MODERN LOOK. DEMAND HAS BEEN LESS THAN EXPECTED SO WE KEPT THE FUNCTION AND CHANGED THE FORM.

THE NEW ER3 WINGBLADE BORROWS ITS SHAPE FROM THE POPULAR ER2 BUT WITH GREATER WEIGHT CONCENTRATION TOWARD THE REARWARD HEEL AND TOE. THE REAR EDGE OF THE CENTER CAVITY SECTION HAS A CUT-AWAY SHAPE IN A FORWARD-POINTING “V” INTERSECTING WITH THE CENTER SIGHT LINE. THIS REMOVES MASS FROM THE MIDDLE OF THE HEAD ALLOWING FOR MORE WEIGHT ON THE EXTREME HEEL AND TOE FOR INCREASED STABILITY.
 

ER7CS

ER7CS – THIS IS A CENTER-SHAFTED VERSION OF MYGOLFSPY’S “2017 MOST WANTED MALLET”. FOLLOWING THE SAME PRODUCTION PATH AS THE AS THE ER2CS, WE ALSO THICKENED THE CAVITY WALL TO ALLOW FOR THE HOSEL PIN AND REMOVED MASS FROM UNDER THE FORWARD HEEL AND TOE TO MAINTAIN THE SAME FEEL AND STABILITY OF THE ORIGINAL ER7 FULL MALLET.

BY CHOOSING THIS YEAR’S TOP-TWO MYGOLFSPY MOST WANTED BLADE AND MALLET PUTTERS WE HOPE THAT THOSE GOLFERS DEMANDING A CENTER-SHAFT PUTTER WILL FIND SOMETHING TO LOVE IN THE NEW ER2CS AND ER7CS MODELS.